4126870-45 family sewing machines : 1 2 3 4 5 6 7
Before fitting sewing machines, please check the following classification :
(HUSQVARNA VIKING sewing feet belongs to TAIWAN UNIQUE choosen)
By finding the code letter that represents your machine from the list below,
You'll be able to tell which accessories through-out the catalogue are available for your machine.
If you have any questions, Please check the HUSQVARNA VIKING offical website : HUSQVARNA VIKING
Which presser foot fits your sewing machine? Just check the following.
An invisible zipper is always inserted before stitching the garment
seam. The Invisible Zipper Foot has two grooves underneath the
foot to accommodate the zipper coils and hold them in place as
you stitch. Buy a zipper that is at least 1 ¼" (3 cm) longer than
the zipper opening.
1. Mark the length of the zipper opening on the seam allowance and on the zipper. The excess
length should be at the bottom of the zipper. Snap on the Invisible Zipper Foot. Select
center needle position straight stitch. Length 2.5–3.0.
2. Unzip the zipper.
3. Place the right part of the zipper on the fabric right sides together. The coil should be on the
seam line and the top stop of the zipper ¾" (2 cm) below the cut edge of the fabric.
4. Finger press up the zipper coils and lower the presser foot with the zipper coils in the right
opening under the foot. Adjust needle position to align the needle with the needle guide
on the front of the foot. Backstitch and sew. Stop at the mark on the zipper and seam
allowance and backstitch to tie off.
5. Place the left part of the zipper right sides together with the left side of the garment. Lower the
presser foot with the left opening over the zipper teeth. Make sure that the needle is perfectly
aligned with the needle guide in front of the foot again. Sew in the same way as the fi rst side.
6. Pull up the zipper pull. Place the fabric with the zipper right sides together. Snap on the regular
Zipper Foot E to the left of the needle. Adjust needle position to the right. Pin
the rest of the fabric below the zipper right sides together. Sew the seam from the lower
edge and up to the zipper overlapping the backstitched seam. If the zipper is too long,
whipstitch across the zipper teeth 1 ¼" (3 cm) below the inserted zipper length. Cut
away excess zipper below the whipstitching.
HUSQVARNA VIKING 1
ORCHIDEA™, 1250, #1+, 1200, 1100, 1090, 1070, 1070 S, 1050.
HUSQVARNA VIKING 2.
990 S, 990, 980, 960, 950 S, 950, 945, 940.
HUSQVARNA VIKING 3.
630, 620, 610, 190, 185, 180, 150, 120.
HUSQVARNA VIKING 4.
105, 100, 95, 90.
HUSQVARNA VIKING 5.
PRELUDE™ 360, PRELUDE™ 340,
DAISY™ 335, 330, 325, 320, 315, 310,
HUSQVARNA VIKING® 250, 230, 225/215, 210, 205,
SCANDINAVIA™ 100,
EMERALD™ 122, 118, 116.
HUSQVARNA VIKING 6.
PLATINUM™ 955 E, 950 E,
PLATINUM™ Plus 775, 770, 755
Quilt, 750 Quilt, 735, 730, 715,
ROSE™ 605, 600,
IRIS™, LILY™ 555, 550, 545, 540, 535, 530,
HUSQVARNA VIKING® 500,
INTERLUDE™ 445, 435,
FREESIA™ 425, 415,
HUSQVARNA VIKING® 400, 350,
SCANDINAVIA™ 400, 300, 200,
EMERALD™ 203, 183.
HUSQVARNA VIKING 7.
DESIGNER DIAMOND deLuxe™,
DESIGNER DIAMOND™, DESIGNER
RUBY™ DESIGNER TOPAZ™ 30, 20,
DESIGNER™ SE, DESIGNER™ SE
Limited Edition, DESIGNER™ I, II,
QUILT DESIGNER™,
QUILT DESIGNER™ II, SAPPHIRE™
875Q, 870Q, 855, 850, 835, 830.
------------- Or, you can contact us for more detail.
We offer sealed card, double folding blister, regular card package.
1. Double Card & Double Blister ;
2. Sealed Card ;
(Please kindly contact us for more package details)
For series 1 package, we can offer 5 size to you. Check the following Size.
Type 1. 8cm X 8cm Double folding
Double folding Blister size : 8X7.5X2cm (lenght X width X height)
Capacity of product : 5X4X1cm (length X width X height)
Type 2. 7.5cm X 15.5cm Double folding
Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)
Capacity of product : 5X4X1cm (length X width X height)
Type 3. 7.5cm X 15.5cm Double folding
Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)
Capacity of product : 5X4X2cm (length X width X height)
Type 4. 7.5cm X 15.5cm Double folding
Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)
Capacity of product : 7.5X5X3cm (length X width X height)
Type 5. 10.5cm X 18cm Double folding
Double folding Blister size : 18X10.5X4cm (lenght X width X height)
Capacity of product : 8X6.5X4cm (length X width X height
For sealed card package, we offer 1 type to you.
Series 9.5 X 9.5 cm sealed card package (1 sewing foot in)
Card size : 9.5 cm X 9.5 cm (length X width)
Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)
----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.
This foot can be also used on the ''regular low shank'' sewing machines.
Step 1. Change 4124112-45 or 4126161-45 to replace the original shank adapter.
Step 2. Use the screw from RENJYI - RJ-SC03 R3 to against the bar.
Step 3. try it on and use it.
↑ 4124112 + R3 (RJ-SC03)
↑ 4126161-45 + R3 (RJ-SC03)
